|
TM 20, TM 25 - TM30 Hydraulic Bridge Press + Powered
Loading Trays
The RELCO TM20 is a highly compact HF welding machine which is suitable
for a wide range of applications in the automobile industry, inflatables,
medical mattresses, nursery furnishings and extra large sample swatches
etc. The hydraulic press enables the fast action and high pressures
required for difficult materials and lay-ups. The construction is adaptable
for other applications e.h. Increased daylight to 610mm (24") for automobile
carpets. The electronic circuitry incorporates the very latest technology
to achieve maximum efficiency from the H.F. Output which, combined with
the mechanical features, enables optimum productivity.
Services
380 - 440V 3 phase 50Hz electrical supply (other voltages available)
Full load consumption, typically (20Kw 38A/ph, 25Kw 45A/ph)
Standby consumption of 1.6Kw
Mechanical Specification
| Construction |
Welded square section steel frame. Reinforced
steel bottom platen. Cast aluminium top platen. Hinged / Removeable
control cubicle. |
| Hydraulic cylinders |
2 x 83mm (3 1/4") bore with through shaft |
| Stroke |
203mm (8") |
| Hydraulic power |
Integral power pack with multi-stage pumps. |
| Pressure |
In excess of 7 tonne |
Electrical Specification
| H.F power output |
Adjustable from 3Kw to full power |
| Frequency |
27.12MHz |
| Process timers |
Synchronous with elapsed time display. Weld &
Dwell + preweld for heated platen |
| Rectifiers |
Solid state |
| Osclilator valve |
Ceramic |
| Control circuit |
24V removable PCB's with plug in relays etc. |
Dimensions
| Upper platen |
Typically 750 x 1600mm (30" x 63") |
| Lower platen |
915 x 1640mm (36" x 65") |
| Height |
1900mm (75") |
| Weight |
Approx. 2 tonne |
|
 |
Back
Compact size with
ability to reduce for transit / siting