AV7/AV9/AV15

7 - 9 - 15Kw Anvil Bridge Press
This well proven equipment was designed to overcome the limitations encountered with "C" type presses when handling a large bulk of material in a limited throat space. The 1270mm (50") opening eases the flow of material in large quantities whilst the 625mm (25") high anvil facilitates manoeuvring for handling difficult corner welds and large curves etc. Alternative welding tool configurations are available. This narrow press design is also easily adaptable for other applications such as the joining of CONVEYOR BELTS and the welding of FLIGHTS. For this purpose the anvil is replaced by a narrow platen spanning the 1270mm (50") opening.

Services

380 - 440V 3 phase 50Hz electrical supply (other voltages available)
Full load consumption, typically (7Kw 17A/ph, 9Kw 20A/ph, 15Kw 17A/ph)
Standby consumption of .75Kw

Specification

Construction	Fabricated steel square section frame
Clamping force	102mm (2 x 4") pneumatic cylinders, clamping force 1140Kg at 7 Bar
Press operation	Foot pedal, servo valve
Air requirement	Typically 0.003 cu.M (0.12 cu.ft) per lift
Press stroke	Adjustable from control panel. 152mm (6") max to 12.5mm (1/2") min
H.F. Power	Adjustable from 1kw to full power
Frequency	27.12MHz
Oscillator valve	Ceramic
Rectifier	Solid state
Process timers	Weld & Dwell synchronous time elapsed
Control chassis	Removeable PCB's with plug in relays

Dimensions

Top electrode tool	Typically 610mm x 25.4mm (24" x 1")
Bottom platen	Typically 610mm x 510mm (24" x 20")
Dimensions	Length 2000mm (78"), Width 610mm (24"), Height 2134mm (84")
Working Area	With anvil removed 1270mm x 1270mm (50" x 50")
Anvil height	635mm (25")
Weight	Dependant on model, approx. 550Kg (1212Lb)

Features
Stroke adjustable from 12.5mm to 152mm by
simple control on front panel
Output overload protection with warning light
and reset button
Arc limiter, ultra sensitive for minimal damage
Grid switching to eliminate contactor wear and
improve reliability
Easy maintenance with printed circuit boards
and plug in relays
Mains On / Off switch with automatic overload
cut-out
Alignment marker light for locating materials

Back

Home