|
Quality Assurance, Simplified
The Relco Seal Integrity Signal Analyser (SISA2)
works seamlessly with your induction system to
provide a convenient and rapid assessment of
critical parameters for each and every weld operation.
Information is produced in the form of a simple
pass/fail
result and further detail can be shown on
an integrated alphanumeric display. The system is
simple to set up
and use with both external PLC
interface and manual
control via an intuitive three
button menu driven system.
Intended for OEM applications, this self-contained
unit
precisely records on-time and heating power
available
at the head over the entire weld cycle,
rejecting sealing
operations should ambient
conditions be sufficiently
adverse to warrant concern.
The result is a real-time
verification of the magnetic
environment required for
reliable, consistent sealing.
Depending on the specific
application, functionality
may be enhanced to detect the
presence, orientation
and condition of foil providing a
further degree of
confidence in finished product.
Measurements are made at the rate of 64,000
samples
per second and over 1.2 million calculations
are typically
completed using four independent
analytical strategies
before the final result is
announced or despatched to
the PLC. In the majority
of situations, external sensors
are unnecessary
making upgrades to existing stations a
simple task.
Typical Connection
|
Back
PDF Datasheet