MIT-1   

SEMI-AUTOMATIC CAPLESS INDUCTION SEALING MACHINE

Direct Contact Induction Sealing head
High accuracy Power,Time and Pressure control
Integral 800W air cooled digital induction generator
Universal system - seals any size/type of container
Vacuum foil location for precision seal placement

The Relco MIT-1 is a multi-container capless induction seal application platform for low volume production,product development and test purposes.The system is designed to allow for the direct application of a foil to a container without the need for a cap to locate or compress the seal on/against the sealing land area.Maximum flexibility is provided in control over all sealing parameters to determine the optimum
sealing conditions for any container.The user can adjust the downward force against sealing land area, the delay time before the induction power is activated, the induction cycle time and the post-induction 'cooling' time as well as the induction power level, control over which is provided by a 10 turn vernier dial. The Relco MIT-1 machine allows for very accurate seal forming and location combined with the superior quality of an induction seal but without the conventional requirement of a cap.

Technical Specifications:
Supplies: Power 220-240v a/c Single Phase -
Rated 5 Amps // Compressed Air: 1-7 Bar
Dimensions: Footprint - 350mm x 350mm
(Control Box - 350mm x 350mm x
115mm)
Weight: 30Kg
Pneumatics: 1 x 36mm bore SMC 50mm Stroke
Head Cylinder
SMC 10 Bar Max. Pressure Regulator
SMC 10 Bar Max. Pressure Gauge
Vacuum: SMC (ZH10B) Venturi Vacuum
Generator
Solenoids: SMC 24v DC Solenoid Valves
Sealing Heads: As required for application with
internal vacuum pick & place device
Electrical Specification:
Generators: 1 x Relco P-800 (800W) Solid State
Induction Generator with full power
control
Controls: 24v dc control circuit supplied by
Omron 0.3A regulated power supply
Safety: 0.5 Independent 2-hand cycle start
with interlock